Aqara Motion and Light Sensor P2
Symbolbild (Stockfoto); nicht das abgebildete Produkt.
The Light Reading Is The Useful Part
A plain motion sensor triggering a light is the first automation everybody builds and the first one that annoys them, because it turns the light on at midday when nobody wanted it.
A sensor that reports ambient light as well as motion lets the automation say "if there is movement and it is dark", which is the condition people actually meant. That single addition is the difference between a useful automation and one you disable.
The light reading is independently useful too — it can drive blinds, or tell you whether a room needs lighting at all, without any motion involved.
Detection Behaviour And Its Limits
This is an infrared motion sensor, which detects movement of a warm body across its field of view. It is reliable for somebody walking into a room and much less so for somebody sitting still.
That limitation matters for the common case of a light in a room where you sit and read, where a motion sensor will decide the room is empty and switch the light off on you.
For that case, millimetre-wave presence sensors detect a stationary person and cost more. Choosing between the two depends entirely on whether the room is one you pass through or one you sit in, and that is the decision to make before buying.
Thread, Battery And Placement
It uses Thread, so it extends the mesh rather than loading the router, and runs a claimed multi-year life on a coin cell.
Placement determines everything. Infrared sensors are triggered by any moving heat source, so pointing one at a radiator, a sunlit window or a heating vent produces phantom triggers that are difficult to diagnose afterwards.
Mounting height and angle set the coverage area, and a sensor in a corner at head height covers a room far better than one on a shelf pointing across it. Moving a sensor a foot often fixes a problem that no configuration change will.
Automation And Practicalities
Local processing means the sensor triggers automations without a round trip to a server, which matters more for lighting than almost anything else — a light that comes on a second and a half after you walk in feels broken.
Timeout behaviour needs configuring: how long after the last motion before the room counts as empty. Too short and lights go off while you are there; too long and they burn for twenty minutes after you leave.
It needs a Thread border router, as with any Thread device, and that should be confirmed before buying.
Who It Suits
This suits hallways, landings, bathrooms, cupboards and garages — rooms you pass through, where motion detection is exactly the right signal and the light reading stops daytime triggering.
It suits less well a living room or study where people sit still, and where an infrared sensor will decide the room is empty. A millimetre-wave presence sensor is the correct device there.
It suits particularly well anyone building a whole-house lighting automation, because at this price and battery life fitting one in every transitional space is realistic.
The Verdict
A cheap, small sensor whose ambient light reading is what makes motion-triggered lighting actually usable rather than annoying.
Infrared detection cannot see a stationary person, placement is critical and easy to get wrong, and it needs a Thread border router.
Match the sensor to the room: motion sensors for spaces you walk through, presence sensors for spaces you sit in. Getting that wrong is the most common mistake in lighting automation.
Auf einen Blick
Vorteile
- Ambient light reading stops daytime triggering of lights
- Local processing means automations fire immediately
- Thread mesh with multi-year coin cell life
- Light reading useful independently for blinds and dashboards
Nachteile
- Infrared cannot detect a stationary person
- Placement near radiators or sunlit windows causes phantom triggers
- Requires a Thread border router
- Timeout behaviour needs careful configuration
Häufig gestellte Fragen
Why does the light reading matter?
Because it lets the automation say "if there is movement and it is dark" rather than just "if there is movement". Without it, motion-triggered lights come on at midday, which is the first thing that makes people disable the automation they just built.
Will it work in my living room?
Poorly. Infrared detects a warm body moving across its field of view, so somebody sitting and reading registers as an empty room and the light goes off on them. For rooms you sit in, a millimetre-wave presence sensor is the right device.
Why do I get false triggers?
Almost always placement. Infrared responds to any moving heat source, so a sensor pointed at a radiator, a heating vent or a sunlit window triggers phantoms. Moving the sensor a foot fixes problems no configuration change will.
Spezifikationen
| Detects | Motion and ambient light |
| Detection type | Infrared |
| Stationary people | Not detected |
| Protocol | Thread |
| Border router | Required |
| Battery | Coin cell, multi-year |
| Processing | Local |
| Best for | Transitional spaces |
Fazit
The light reading is what makes motion-triggered lighting usable instead of annoying. Use it in spaces you walk through, not spaces you sit in.
Preis auf Amazon prüfen