Thermostats & Climate / tado° Smart Thermostat V3+

tado° Smart Thermostat V3+

4.3 / 5 • Mis à jour September 2026
Thermostats & Climate

Image illustrative (photo de stock) ; ce n'est pas le produit exact.

Per-Room Heating Is The Real Saving

A single thermostat heats the whole house to one temperature regardless of which rooms are in use, which means heating bedrooms all evening and a dining room nobody enters.

tado's approach pairs the thermostat with smart radiator valves so each room has its own temperature and schedule. Heating only the rooms in use is a larger saving than any amount of clever scheduling on a single-zone system.

That is the genuine argument for the system and it scales with house size. In a large house with many rooms used at different times, per-room control is where the money is.

Location-Based Control

It uses phone location to know whether the house is empty, and turns heating down when the last person leaves and back up when somebody approaches.

That handles irregular schedules better than any learned or programmed timetable, because it responds to what is actually happening rather than a prediction of it.

It depends on phones and location permissions, which means a household member with location off breaks the logic. Setting it up for everybody who lives there, rather than one person, is necessary for it to work.

Radiator Valves And What They Cost

The valves replace existing thermostatic radiator valve heads, which is usually a simple job requiring no draining, though older or seized valves can be awkward and occasionally need a plumber.

Each valve is an additional purchase, and equipping a whole house is a significant total cost. The honest approach is to fit valves in the rooms where it matters — bedrooms, a spare room, a dining room — rather than all of them at once.

Valves are battery powered and need periodic replacement, which across ten radiators is a real if minor recurring task.

Open Window Detection And Practicalities

It detects a sudden temperature drop and turns the radiator down, which sounds minor and addresses one of the more common household wastes — heating a room with a window open.

Some features have historically been behind an optional subscription, and checking what is included before buying is worth doing so the expected functionality is actually the functionality you get.

It works with a wide range of heating systems including many older ones, which is a practical strength compared to thermostats with narrower compatibility.

Who It Suits

This suits a house with several rooms used at different times, where per-room control saves considerably more than a single-zone smart thermostat can.

It suits less well a small flat with two radiators, where the valve cost outweighs the saving and a single thermostat is sufficient.

It suits particularly well households with irregular, unpredictable schedules, where location-based control works and no fixed or learned timetable does.

The Verdict

The right approach for a house rather than a flat: per-room radiator control is where the real heating saving is, and location-based control handles irregular schedules better than scheduling.

Valves are a significant additional cost, need batteries, location control needs everybody's phone configured, and some features have been subscription-gated.

Fit valves in the rooms where it matters rather than all of them — bedrooms and rarely used rooms first, which is where most of the saving sits.

En un coup d'œil

Avantages

  • Per-room control saves more than single-zone scheduling
  • Location-based control suits irregular schedules
  • Open window detection catches a common waste
  • Works with a wide range of including older heating systems

Inconvénients

  • Radiator valves are a significant additional cost
  • Valves need battery replacement across many radiators
  • Location control needs every household phone configured
  • Some features have been behind a subscription

Questions fréquemment posées

Do I need valves in every room?

No, and you should not buy them all at once. Fit them where it matters — bedrooms, a spare room, a dining room used occasionally — which is where most of the saving sits. Equipping a whole house is a significant cost for diminishing return.

Does location control actually work?

Yes, and it depends on every household member having the app with location permission. One person with location off breaks the logic, so set it up for everybody who lives there rather than one person.

Is it better than a learning thermostat?

For a multi-room house, yes — per-room control saves more than any scheduling on a single zone. For a small flat with two radiators, no: the valve cost outweighs the saving and a single thermostat is sufficient.

Spécifications

TypeSmart thermostat with per-room valves
ZoningPer radiator
ControlLocation-based plus schedules
Window detectionTemperature drop
ValvesReplace existing TRV heads, battery powered
CompatibilityWide, including older systems
SubscriptionCheck which features are gated
Best forMulti-room houses

Résumé

Per-room radiator control is where the real saving is, and location control beats scheduling for irregular lives. Fit valves in the rooms that matter.

Vérifier le prix sur Amazon